Door Station Operation; Door Talk / Listen; Door Release / Security Option - Linear DMC3-4 Operation & User’s Manual

System master with dmcmp3 - cd/mp3 player
Table of Contents

Advertisement

Operating the Intercom

DOOR STATION OPERATION

The Door Stations are used to announce
visitors with the door chime. The chime can
be answered and persons in the residence
can have a conversation with the visitor.
When the button on the Door Station is
pressed, the chime is heard on all stations
set to INTERCOM or RADIO/INT.
• All system audio (music and intercom) is
muted when the chime rings.
• If the Door Station is engaged in a talk or
listen session, the chime will be disabled until
the session is over.

Door Talk / Listen

On the Master Station (or on a Patio or
Room Station), press TALK and LISTEN
together to enter Door Talk Mode. This
allows you to talk to the Door Stations. All
other stations set to INTERCOM or RADIO/
INT can hear the conversation.
Release the TALK and LISTEN buttons to
listen to the Door Station. The Door Listen
Mode is active for a total of 25 seconds
after you release the TALK and LISTEN
buttons. You may talk again at any time
by pressing the TALK and LISTEN buttons.
Each time the buttons are released, you
can listen for another 25 seconds.
✓ Note: Door Talk mode is suspended at the
end of the 25 second listening period or if you
press either the TALK or the LISTEN button
individually.

Door Release / Security Option

This optional feature can control another
system connected by your installer. For
example, it may control a door release
mechanism, turn on the lights, or activate
an alarm.
12
VISITOR
PRESSES
THE DOOR
STATION'S
BUTTON TO
SOUND CHIME
VISITOR AND
RESIDENT THEN
CAN TALK AND
LISTEN
Figure 12. Door Station Operation
PRESS BOTH THE
LISTEN AND TALK
BUTTONS TO TALK
TO THE DOOR STATION
Figure 13. Door Talk / Listen
Activating the Door Release Option:
1. Press and hold the VOLUME ▲ and
VOLUME ▼ buttons for about fi ve seconds.
2. The display will indicate RELEASE when the
option is activated. The Door Release output
is active for as long as both buttons are held
pressed.
3. Release the buttons to stop the Door Release
output.
✓ Note: This function is available from the
Master Station and all remote scan Room
Stations. For security reasons, it is not
available from a Patio Station.
ROOM STATION
OR
PATIO STATION

Advertisement

Table of Contents
loading

Table of Contents