Connection Setup; Usb Modem Mode Connection - D-Link DIR-457 User Manual

D-link dir-457; dir-457u router

Hide thumbs Also See for DIR-457:

Table of Contents

Section 2 - Installation

1. Move the router/modem selection switch to USB modem mode.

2. Connect the DIR-457/DIR-457U myPocket Router to your computer with the included

USB cable. To do this, insert the USB cable into the Mini-USB port of the DIR-457/

DIR-457U myPocket Router and the other end into a free USB port of your computer.

3. Press the power button on the DIR-457/DIR-457U.

4. The Connection Manager software will automatically start up.

5. Configure your router/modem settings using the Connection Manager.

6. You can now use the DIR-457/DIR-457U myPocket Router as a USB modem.

Note: You have to install the Connection Manager software when using the DIR-457/DIR-

457U for the first time. After successful installation, you can configure USB modem and

Wi-Fi router basic settings. When the DIR-457/DIR-457U is used in USB modem mode,

you can manage your 3G connection using the D-Link Mobile Connection Manager (please

refer to session 2 - Managing 3G connection).

D-Link DIR-457/DIR-457U User Manual

Connection Setup

MODEM

ROUTER

MODEM

InstallShield Wizard

Welcome to the InstallShield Wizard for

DIR-457 USB Modem

Table of Contents

Dir-457u