NAD M50 Owner's Manual page 7

4 Select "Configure WiFi".
5 Select your home network or applicable wireless network name (SSID)
from the "Configure wireless" drop down menu.
6
8
6 Enter your home network's Wireless Password (Passphrase, WEP/WAP
key as applicable) in the field "Enter password or key (if protected)".
The Password (Passphrase, WEP/WAP key as applicable) is the same
Password that was setup or generated during the configuration of
your home router or gateway. An incorrect password entered in the
"Configure wireless" menu screen will simply cause the unit to timeout
and return to Hotspot Mode.
Trying multiple passwords will not damage the device in any way. If
you are not sure what is your Password, login to your router and locate
the Password in the applicable setup screen for Wireless Configuration
section. Refer to your router's documentation for further information.
7 Select a "Player name" from the drop down list or use the on-screen
keyboard to create a customized room name in the field "Custom
name".
8 Select "Update" and wait for the VFD to show
Ready
Your M50 is now connected to your home network and ready to be
used with the NAD M50 controller App.
DOWNLOAD THE APP
Upon successful setup connection, you will be directed to the "Congratulations"
page where you can select the highlighted "iOS App from the Apple App Store"
to download and install the "M50 Remote" App to your iPad.
After successfully downloading the M50 Remote App, select
iPad screen to open the NAD M50 Control Panel.
CONNECT TO MUSIC
5
7
from your
You're now ready to stream music by
selecting any source from the Local
Sources or Streaming Services.
Follow the screen prompts, and open
your whole home to the pleasure of
streaming HiFi music.
7