T O Delete; Dialing A Stored Number With The Handset; Ialing A - GE 21095 User Manual

T D :
O ELETE
1. Make sure the phone is OFF (not in talk mode).
2. Press MEM/mem button on the base or handset.
3. Press the touch-tone pad on the handset or the base, or use the CID/vol
( or ) button on the handset or CID/messages (
base to scroll to a desired record.
4. When the record shows in the display, press the flash/delete button
on the base or handset to mark the record for deletion. The display
shows DELETE?
5. Press the flash/delete button on the base or handset to delete the
record. DELETED shows in the display.
NOTE: If you don't want to change or delete a number, press the EXIT button
on the base or the exit/answerer button on the handset, or wait for one
minute to exit the review mode automatically.
D S

IALING A

TORED
1. Make sure the phone is ON by pressing the talk/callback button.
2. Press the mem button.
3. Enter the memory location number (01-50) for the desired memory
location. The number is dialed automatically.
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button.
38
317 - 123 - 4567
* * DELETED * *
N
UMBER WITH THE
-OR-
0 3
MEMO
DELETE ?
H
ANDSET
or ) button on the