Panasonic Viera TH-L19X10ZK Operating Instructions Manual page 55

Problem
Due to the digital reception technologies involved, quality of the Digital TV signals may be
relatively low in some cases, despite good reception of Analogue TV channels.
Unable to receive signals
with a high-performance
aerial
Interference or frozen /
disappearing image in Digital
TV
TV takes so long to turn on
The programme cannot be
changed
The programme cannot be
selected
TV goes into "Standby
mode"
The remote control does
not work
Install an aerial individually for the TV and VCR (or use a
splitter).
TV
Aerial
Input
terminal
VCR
Check "Digital TV Signal Condition". (p. 33)
If "Signal Quality" or "Signal Strength" are displayed in
red, check aerial.
If problem persists, consult your local Panasonic dealer.
Turn the TV off with the Mains power On / Off switch,
then turn it On again.
Like your computer, the TV has to run a number of
diagnostic and software checks before it can display any
programmes.
Is the TV in Teletext mode? (p. 18)
Is the programme skipped? (p. 31)
Off Timer function is activated.
The TV enters "Standby mode" about 30 mins. after
analogue broadcasting ends.
Are the batteries installed correctly? (p. 7)
Has the TV been switched On?
Actions
(Individual aerial)
Splitter
Aerial Output
Aerial Input
Aerial Output
(Individual aerial)
55