Table of Contents
Advertisement
Technical Information
CH 1 - CH 11
Rating
-
G
PGR
AO
Update system software to ensure that you have latest version software.
If there is an update available, a notification banner is displayed when the channel has the update
information.
To download new software, press "OK"
If you choose not to download, press "EXIT".
To update automatically
Set "Auto Update Search in Standby" to "On" (p. 27)
If there is a new version software being broadcast, the TV will download this automatically.
The automatic updating sequence is carried out at 3:00 AM and 5:00 AM every morning under the
following condition.
Standby (TV turned Off with the remote control)
Recording is not in progress.
To update manually
Perform "System Update Search Now" (p. 27)
If there is an update available, a notification banner is displayed.
Note
During downloading, do not turn Off the TV or touch any buttons.
(The TV is automatically activated after downloading is completed.)
When the TV is switched to standby, there will be a clicking sound after a short delay. Similar clicking
sounds will also occur at 3:00 AM and 5:00 AM when "Auto update Search in Standby" (p. 27) is set
to "On". These sounds are normal.
When you receive the stereo / bilingual sound system, sound output modes can be selected by
pressing the Stereo / Bilingual Sound Selection button.
Audio Signal
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of
broadcast
Mode Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Type of
broadcast
Mode Indicator
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic
switching occurs, it is recommended you switch from STEREO to MONO.
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO
position, using the stereo / bilingual sound selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
50
Channel Allocation (Analogue TV mode)
CH Display / Receive Channel
CH 21 - CH 70
Updating the software system (Digital TV mode)
Stereo / Bilingual Sound Selection (Analogue TV mode)
STEREO
Regular broadcast
Regular + NICAM MONO
(Standard Audio)
No
Indicator
Regular broadcast
(Standard Audio)
No
Indicator
CH 74 - CH 78
Rating (Digital TV mode)
Meaning
Not classified
Parental Guidance Recommended
Adults Only
Downloading (approx. 1 hour)
MAIN
(MAIN )
BILINGUAL or DUAL MONO:
MAIN / SUB
General
SUB
NICAM
STEREO
STEREO
CH 80 - CH 120
MONO
NICAM DUAL MONO
(MAIN / SUB
)
Hide quick links:
Advertisement
Table of Contents
