CITROËN C3 Handbook page 38

Multifunction screens
Display configuration
This menu allows you to choose a colour
scheme for the screen, adjust the brightness,
date and time and choose the units for distance
(km or miles), fuel consumption (l/100 km,
mpg or km/l) and temperature (°Celsius or
°Fahrenheit).
Date and time
F Press "SETUP".
F Select the "Display configuration" and
press the knob to confirm.
F Select "Adjust date and time" and press
the knob to confirm.
F adjust the settings in turn using the
directional arrows then confirm by pressing
the knob.
Select "Synchronise minutes with GPS" so
that the minutes are adjusted automatically by
satellite reception.
Adjustment of voice synthesis
This menu allows you to adjust the volume for
navigation instructions and choose the type of
voice (male or female).
38
Language
This menu allows you to choose the language
used by the display from a defined list.
Vehicle parameters
This menu allows you to activate or deactivate
certain driving and comfort systems, arranged
by category:
- "Parking sensors"
- "Rear wiper operation"
● "Rear wiper in reverse: O" (Rear wiper
coupled to reverse)
Refer to the corresponding section.
- "Lighting configuration"
● "Duration of guide-me-home
lighting: O" (automatic guide-me-home
lighting)
Refer to the corresponding section.
- "Driving assistance"
● "Initialisation of under-inflation"
(Reinitialisation of the tyre under-
inflation detection system)
Refer to the corresponding section.
Trip computer
This menu allows you to see information on the
state of the vehicle. You can choose between
the following functions:
- "alert log".
List of active alerts.
- "State of functions"
List of the state of functions (activated,
deactivated or faulty).
For safety reasons, configuration of the
multifunction screen by the driver must
only be done when stationary.