Pioneer AVX-7300 Installation Manual page 12

Installation
2. Fastening the unit to the factory radio mounting bracket.
(Fig. 11) (Fig. 12)
Select a position where the screw holes of the bracket and the screw holes of this product
become aligned (are fitted), and tighten the screws at 2 places on each side. Use any of
binding screws (4 ´ 3 mm), binding screws (5 ´ 6 mm) or flush surface screws (5 ´ 6
mm), depending on the shape of the screw holes in the bracket.
*1 Use binding screws (4 ´ 3 mm) only.
Factory radio mounting bracket
11
* 1
* 1
12
Screw
11
Dashboard or Console
13
Fig. 11
Fig. 12