a : 1 457 mm
b : 356 mm
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Pull out the cover from the pedestal.
2 Remove the assembly screws
3 Lift up the TV at a slight angle from the pedestal as
shown.
(View from the side)
4 Attach the cover to the pedestal.
8
English
Hooks
4
from the TV.
A
Connections
●
External equipment and cables shown are not
supplied with this TV.
●
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
●
Check the terminal type and cable plugs are correct
when connecting.
●
Use a fully wired HDMI compliant cable.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
Terminals
1
5
6
1 SD Card slot
2 USB 1 - 3 port
3 HDMI1 - 3
(p. 9, 10)
4 DIGITAL AUDIO OUT
5 ETHERNET
(p. 9)
6 Aerial terminal
(p. 9)
7 AV (COMPONENT / VIDEO)
8 DisplayPort™
(p. 10)
9 HDMI4
●
To watch contents of 4K format, use HDMI terminal or
DisplayPort.
(p. 10)
2
3
4
7
8
9
(p. 10)