Steering Wheel Control (Swc) Operation - Jensen VX3022 Operation Manual

SWC Ready
The built-in SWC interface is compatible with PAC steering wheel control
modules. The PAC SWI-RC is recommended.
A third-party SWC adapter must be used in order for the VX3022 to be
compatible with any steering wheel controls.
Notes:
Not all OE steering wheel functions may be supported by the VX3022. PTT -
Will activate Siri / Google Voice if mobile phone supports the feature. Not
compatible with all phones/vehicles.
The following controls are available for most vehicles:
1. Volume
Up (+)
2. Volume
Down (-)
3. Mute
PAC SWI-RC Installation Hints
1. . Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Other/Sony".
2. . Programming - Use the Pioneer/Sony/Other radio function mapping order for
Jensen branded head units.
3. . When programming the SWI-RC, if a function is not supported (or not desired),
then the function MUST be skipped as per the PAC SWI-RC instructions.
4. . The SWC function MUST be programmed in the correct order per the PAC
SWI-RC radio function mapping order instructions.
Seek /
4. Preset (+) 7.
Track +
Seek /
5. Preset (-) 8.
Track -
6. Source 9. Band
37
VX3022
10. BT Send
11. BT End
12. PTT