NComputing N500 User Manual page 30

1. From the Manage Profiles menu, select the N-series profile you wish to edit. If an N-series
profile does not already exist, use the steps outlined in Section 4.5 of this manual to create a
new profile for the devices you wish to update.
2. Navigate to the Firmware Update Tab (pictured below).
3. Check the box next to "Edit settings" setting at the top of the menu, then select "Update from a
specified firmware file on a FTP server".
4. Using the FTP, User, and Password fields (making sure to re-enter your password in the Confirm
field), enter the FTP location of the newest firmware build within the archive you have created.
(this will be a file ending in .tar.gz)
5. Take a moment to verify that all other profile settings are as you desire (including screen
resolution, XenDesktop settings, etc), and apply the profile from the Summary Tab.
6. If you have not done so already, upload the latest firmware build to your vSpace Management
Center server, using the Manage Firmware menu under the Administration Tab.
7. Once the above steps have been completed, head to the Manage Devices menu under the
Device Management Tab and initiate a firmware update on the devices of your choice, selecting
the most recent firmware version available.
At this point the selected devices will begin pulling updated firmware in the order specified within the
catalog.txt with automatic reboots between each firmware version until the process is complete.
Page 30 of 38
NComputing N-series User Manual rev10.08.13_1.5.0