Canon MG5600 series Online Manual page 397

When checking the orientation:
When you are using the preview screen, the screen below is displayed before copying starts so that you
can check the orientation.
1. Rotate
If you press the right Function button, the original rotates by 180 degrees.
2. Rescan
If you press the left Function button, the original is rescanned.
Press the OK button to start scanning.
When scanning is finished:
The Document setting screen appears on the LCD after scanning each sheet of original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the platen
glass, then press the OK button.
Note
• If you do not need more scanning, press the left Function button. The machine starts copying.
• You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
397