Rules List - TP-Link TL-WR940N User Manual

Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take

effect.
Line Type - Select the right type for you network connection. If you don't know how to choose,

please ask your ISP for the information.
Egress Bandwidth - The upload speed through the WAN port

Ingress Bandwidth - The download speed through the WAN port.


4.13.2 Rules List

Choose menu "Bandwidth Control → Rules List", and then you can view and configure the
Bandwidth Control rules in the screen below.
Description - This is the information about the rules such as address range.

Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN

port, the default is 0.
Ingress bandwidth - This field displays the max and mix download bandwidth through the

WAN port, the default is 0.
Enable - This displays the status of the rule.

Modify - Click Modify to edit the rule. Click Delete to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.
Click Add New... shown in Figure 4-67, you will see a new screen shown in Figure 4-68.
1.
2. Enter the information like the screen shown below.
TL-WR940N/TL-WR941ND
Figure 4-66 Bandwidth Control Settings
Figure 4-67 Bandwidth Control Rules List
70
450Mbps Wireless N Router
.