Positioning Oven Feet For Multiple Cabinet Cutout Heights - Whirlpool W10351242B Installation Instructions Manual

Positioning Oven Feet for Multiple Cabinet Cutout Heights

Single Ovens
The positioning of the oven feet allow a single oven to be
installed in a cutout height between 26¹⁵⁄₁₆" (68.4 cm) and 29⁷⁄₁₆"
(74.8 cm). Refer to the following instructions to position the feet
for the size of your cabinet cutout.
Cutout height is between 27⁵⁄₈" (70.2 cm) and
28⁵⁄₈" (72.7 cm)
The oven feet do not need to be changed. They are positioned
correctly as received.
Go to the "Make Electrical Connection" section.
Cutout Height is between 26¹⁵⁄₁₆" (68.4 cm) and
27¹¹⁄₁₆" (70.3 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Remove the foot from the right front spacer by removing the
#8-18 x ³⁄₈" screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x
3. In the same manner, remove the feet on the right rear, left
front, and left rear of the oven.
4. Using 2 or more people, place the oven in its upright position.
5. Go to the "Make Electrical Connection" section.
Cutout Height is between 28¹¹⁄₁₆" (72.8 cm) and
29⁷⁄₁₆" (74.8 cm)
1. Using 2 or more people, place the oven on its back on a
covered surface.
A
B
C
³⁄₈ " screw
7