Motorola MOTORAZR2 V9 User Manual page 46

1 Your phone will either show a blank [New Account] form
or a list of partially configured blog accounts.
• If you see a blank [New Account] form, proceed to the
next step.
• If you see a list of blog accounts, you can choose an
account or choose to setup a [New Account]. If a blog
account requires more information, or if you choose
[New Account], proceed to the next step.
2 Enter the following details (if you do not know this
information, contact the blog site). The Name and
Upload To are required:
Name: Whatever you want to name the account
(such as MyBlog).
Upload To: The short code or email address for posting
(such as go@blogservice.com or
youruserID@blogservice.com).
URL: The blog site's URL (such as www.blogservice.com),
which can appear in your post notifications.
Notify To: You can notify someone from your contacts
when you post to the blog, if Send Notification is on.
46 messages
Title: The title that your phone uses for your posts
when Auto Blog is on.
3 Press Done to save the blog account details.
Tip: To always post to one blog account (rather than
choosing a blog account each time you post), press
s
> Organiser & Tools > WebShare > Blog Setup > Auto Blog > On.
post to a blog
After you set up a blog account, you can post to it.
Shortcut: After you capture a picture or video,
you can press Options > Post To Blog to post it quickly.
s
Find it: > Organiser & Tools > WebShare > New Blog Message
1 Enter the text for your messsage, or press Options
> Insert to add pictures, videos, or sounds.
2 Press Post or Post To to post the message.