CDX-GT210/GT212/GT262/GT262S
Ver. 1.3
NOTE FOR REPLACEMENT OF THE SERVO BOARD
When repairing, the complete SERVO board (A-1177-201-A) should
be replaced since any parts in the SERVO board cannot be repaired.
NOTE FOR REPLACEMENT OF THE AUX JACK (J901)
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the KEY board.
2. Place the KEY board on the front panel.
3. Solder the three terminals of the jack.
4
1.
2.
KEY board
2-3. Main Board ...................................................................... 11
2-4. Servo Board ..................................................................... 11
3.
4.
AUX jack
5.
5-1. Main Section .................................................................... 29
5-2. Front Panel Section ......................................................... 30
6.
TABLE OF CONTENTS
........................................ 14
.................................. 32