Sony MDS-S40 Service Manual page 14

SLIDER (CAM)
3 bracket (Guide L)
1 two screws (P2.6 × 6)
4 harnes
4 leaf spring
BASE UNIT (MBU-5A), BD BOARD
5 flexible board
(CN104)
6 flexible board
(CN101)
7 BD board
7 slider (Cam)
1 three screws
• Note for Installation of Slider A (Cam)
Set the shaft of Cam gear to
be at the position in the figure.
6 bracket (Guide R)
2 base unit (MBU-5A)
(P2.6 × 6)
4 screw (M1.7 × 4)
– 14 –
Set the shaft of Lever (O/C) to
be at the position in the figure.
5 two screws (P2.6 × 6)
3 Remove the solder (Seven portion).