Playbar Back - Sonos PLAYBAR Product Manual

Sonos PLAYBAR

PLAYBAR Back

Ethernet Ports (2)
Digital Audio In (Optical)
AC Power (Mains) Input
IR Repeater
You can use an Ethernet cable to connect the PLAYBAR to your home network.
Use an audio optical cable (supplied) to connect the Sonos PLAYBAR'S digital audio input
to the optical digital output on your television. Take care not to bend or twist the cable.
Use only the supplied power cord to connect to a power outlet (using a third party power
cord will void your warranty). Be sure to use the proper power adapter for your country.
Push the power cord firmly into the PLAYBAR until it is flush with the surface.
Allows the commands from your remote control to reach your TV if the PLAYBAR is
positioned in front of the TV. This setting is on by default, but can be turned off. See "IR
repeater" on page 14 for more information.
The PLAYBAR's digital audio in and the optical
cable end are 'D-shaped'—be sure to align for
proper insertion.
5