How To Operate; Automatic Operation - Panasonic CS-A75KE Service Manual

S-A75KE CU-A75KE / CS-A95KE CU-A95KE / CS-A125KE CU-A125KE

HOW TO OPERATE

Automatic, Cooling, Soft Dry, Fan
Display
Close the Cover
Operation details
Cooling Operation
COOL
• To set room temperature to your preference of cooling
comfort.
a – Automatic Operation
• At the start of the automatic operation, Heating,
Cooling or Soft Dry is automatically selected
according to the indoor temperature.
• The operation mode changes every hour, when
necessary.
• Temperature is not displayed on remote control during
Auto mode operation.
1
Press to select the desired operation mode
When pressed, the display changes in this order.
DRY
COOL
2
Press to start the operation
POWER indicator LED (Green) on indoor unit will light up.
Press once more to stop operation.
3
Press to select room temperature
• a Automatic Operation
Display
HI
- Operation with 2°C higher than standard temperature.
AUTO
AUTO
- Operation with standard temperature.
- Operation with 2°C lower than standard temperature.
AUTO
LO
HEAT
COOL
• Heating,
Press to increase temperature by 1°C.
Press to decrease temperature by 1°C.
– The temperature can be set between 16°C and 30°C.
– Recommended temperature
For Heating: 20°C - 24°C.
For Cooling: 26°C - 28°C.
For Soft Dry: 1°C - 2°C lower than room temperature.
DRY – Soft Dry Operation
• A very gentle Cooling Operation. Consisting primarily of
dehumidifying. It does not lower the room temperature.
• During Soft Dry operation, the indoor fan operates at Low fan
speed.
Cooling
Operation
Setting
temperature
Switch to Soft Dry when setting temperature is
reached.
42
a
FAN
DRY
Cooling, Soft Dry operation
Soft Dry operation with Low
fan speed