Settings; Screen Aspect Resolution; Zoom; Closed Captioning - Cisco Hawaiian Telcom User Manual

Settings

SCreen ASpeCt reSolution

Using your TV's user guide as a reference, you can adjust your screen settings by choosing
the most suitable resolution from this list and then following steps 1 to 8:
4:3 standard definition
widescreen standard definition
720p on high-definition screens
1080i on high-definition screens
1. Press
.
2. Use to highlight Settings.
OK
3. Use to select Television and press .
4. Use to select Screen aspect ratio and high definition and press
5. Use to select the setting that is appropriate for your TV.
OK
6. Navigate to Continue and press .
OK
7. Navigate to Start Test and press . The system will verify whether your TV can display the
selected setting.
8. If you can see the video on your screen, use
Or if you see a black screen, your TV may not be able to display the selected setting. Use
another setting or check your cables to ensure proper connection between your TV and Set Top Box.

ZooM

You can also change the aspect ratio
of your picture. This can be useful
if you are using a widescreen TV to
watch SD programming.
1. Press .
2. Use to select Aspect Ratio
OK
and press .
3. Use to select the preferred
screen aspect ratio.
8
Settings
OK
.
OK
to select Keep Setting and press to save.
to choose

CloSeD CAptioninG

The Closed Captioning settings allow you to control the closed captioning display on your TV. Closed
captioning text appears if it's available in the original program you're watching. While new TVs are
required to have the Closed Captioning feature, older TVs may not have Closed Captioning and the
feature isn't available on all channels or programs.
1. Press .
2. Use to highlight Settings.
3. Use to select Television
OK
and press .
4. Use to select Closed
OK
Captioning and press .
5. Navigate to Standard Closed
Captioning and select Change.
OK
6. Navigate to Closed Captioning 1 and press
7. Scroll left and select Save. Select Done.
QuiCK tip
You may program the Closed Captioning settings using your Hawaiian Telcom TV Set Top Box or
through your TV itself, in which case you should reference your TV manual for further instructions,
questions and troubleshooting.

DiGitAl AuDio output

Digital audio output allows you to adjust your audio settings.
1. Press .
2. Use to select Settings.
OK
3. Use to select Audio and press .
4. Use to select Digital audio output and press
5. Navigate to select Stereo or Surround sound and press
OK
6. Navigate to select Save and press
.
.
OK
.
OK
.
9