Enblock Dialing - Samsung OfficeServ ITP-5112L User Manual

ENBLOCK DIALING

This option allows you to dial digits then press the SEND button to make the call
(like a cellphone).
• While the handset on-hook press TRANSFER then dial 110.
• Dial 161 to turn Enblock Dialing ON or 160 to turn it off.
• Press TRANSFER to store your selection.
CONFIGURE MOBILE EXTENSIONS
This feature allows you to configure options for any Mobile Extension (MOBEX)
ports that are assigned to you by your telephone system administrator. You can
turn a port on or off; set the telephone number for the port; or set the caller ID you
will be calling in from. The caller ID field has no effect unless you have been
authorized as an Executive MOBEX user. Check with your telephone system
administrator for further details on your specific system configuration.
To set the phone number a MOBEX port can reach you on:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 0 to select the telephone option.
• Dial the number of a C.O. line to use when making calls to this MOBEX port.
• Dial the phone number you can be reached at by users calling this MOBEX
port.
• Press TRANSFER to store your selection and exit programming.
To set the caller ID of the location you will be calling in from:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 1 to select the caller ID option.
• Dial the phone number you will be calling in from.
• Press TRANSFER to store your selection and exit programming.
48
To turn a MOBEX port ON or OFF:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 2 to select the activation status option.
• Dial 0 to turn the port on, dial 1 to turn the port off.
• Press TRANSFER to store your selection and exit programming.To turn a
(MOBEX)
MOBEX port ON or OFF:
• Press TRANSFER and then dial 126.
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft
key to confirm).
• Dial 2 to select the activation status option.
• Dial 0 to turn the port on, dial 1 to turn the port off.
• Press TRANSFER to store your selection and exit programming.
Home Page Table of Contents ITP-5121D
49