Symptom Table; Testing The Finisher - Lexmark Optra N 4040-FIN Service Manual

4040 Finisher

Symptom Table

Symptom
Dead finisher. "Finisher Output Option
Missing" displays on the printer operator
panel when you enter the paper menu
selection.
Paper fails to enter finisher and the
paper feed motor does not run.
The paper feed motor runs but the paper
fails to complete reversing or face down
delivery.
Paper fails to exit swing guide or stapler
tray.

Testing the Finisher

To run paper through the finisher from the printer:
1. Select MENUS.
2. Select PAPER MENU.
3. Scroll until you have the option you want and be sure it is on and
saved.
4. Return to Ready.
5. Select MORE.
6. Select TEST MENU.
7. Select Print Fonts, or Print Test Page.
8. Do not use Continuous for staple or offset because there is no
end of job.
9. Be sure to reset the customer settings when you have com-
pleted the repair.
2-7
Action
Check the power cords and
interface cables. Go to the
"Power Service Check" on page
2-14.
Go to the "Paper Feed Motor
Service Check" on page
Go to the "Reversing Roller
Service Check" on page
Go to the "Paper Delivery
Service Check" on page
2-12.
2-15.
2-11.