Service Mode 6 (Ram Initialization) - Panasonic UF-585 Service Manual

5.6

Service Mode 6 (RAM Initialization)

Initializes RAM and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "6".
5
Press "\/" or "
6 Press "START".
7 Returns to step 3 and press "STOP" to return to standby.
No.
99 SHIPMENT SET (A)
98 SHIPMENT SET (B)
97 FLASH MEMORY CLEAR
16 LBP ERROR LOG CLEAR
15 LOGO/ID/PSWD CLEAR
14 ALL JOB CLEAR
13 PROGRAM DIAL CLEAR
12 ABBR DIAL CLEAR
11 JOURNAL CLEAR
* PARAMETER INITIALIZE
Operation or Unit Condition
/\
" to select the initialization mode. (See Table)
RAM Initialization Table
Initialize Mode
Deletes all setting information, except parameter number 80 and 81, then
set default values.
Deletes all setting information, except parameter number 61, 80 and 81,
then set default values.
Deletes all information in the Flash Memory.
Clears the Printer Error Log.
Clears the Logo, ID, Polling Password.
Clears all Jobs stored in Flash Memory.
Clears the Program keys.
Clears the One-touch and ABBR Numbers.
Clears the Journal contents.
Restores the Fax and Function Parameters to default values.
LCD Display
MAR-12-1999
SET MODE
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
* RAM INITIALIZE *
ENTER NO. OR
* RAM INITIALIZE *
LOGO/ID/PSWD CLEAR
LOGO/ID/PSWD CLEAR
* COMPLETED *
MAR-12-1999
Description
Service Modes
15:00
00%
(1-6)
15:00
00%
173