Door Handle - Dyna-Glo DGF510SSP User Manual

ASSEMBLY INSTRUCTIONS
7. Attach Door handle (Q) to Left door
assembly (R) and Right door assembly (Z),
then attach Match holder (B1) to Right door
assembly (Z) with 4 M4X10 screws (DD)
and M4 Plain washers (EE).
Hardware Used
DD
M4x10 Screw
EE M4 Plain Washer
8. Insert the bottom axis in the Left door assembly
(R) into the hole on the Lower front cart frame
(Y), and insert the Door upper hinge pin (FF)
into the holes of the Lower front cart frame
and the hole in the upper Left door assembly
(R) as shown. Repeat with Right
door assembly (Z).
Hardware Used
Door Upper
FF
Hinge Pin
7
EE
DD
R
x 4
x 4
8
R
x 2
10
Q
Z
FF
S
Y
Z
B1