Download Print this page

Cisco Linksys RV042 Setup Manual page 5

Advertisement

21. Click the System Management Tab, then click the diagnostic tab below.
Type
www.google.com
the screen should show Test Succeeded. If the test fails, double-check the VPN routers
IP address settings and cable connections.
22. Under the DHCP tab, verify that the Enable DHCP Server checkbox is not checked.
23. Click the VPN tab, then click PPTP server below.
24. Click the checkbox to enable PPTP server. Under Range Start, enter the address
192.168.191.224. Under Range End enter 192.168.191.228.
into the Ping host or IP address. Click Go. After a few moments
Instruction # 42-IS-0160, Rev A1
Linksys RV042 Setup
5

Advertisement

loading