Lenovo ThinkCentre M93/p User Manual page 77

4. Press the retaining clip
same time.
Figure 49. Pivoting the drive bay assembly upward
5. Disconnect the signal cable and power cable from the rear of the mSATA solid-state drive storage
converter.
6. Remove the screw that secures the mSATA solid-state drive storage converter. Then, slide the mSATA
solid-state drive storage converter out of the card reader drive bay.
Figure 50. Removing the mSATA solid-state drive from the chassis
1 in the direction as shown and pivot the drive bay assembly upward at the
.
Chapter 5 Installing or replacing hardware
65