Lenovo ThinkCentre M93/p User Manual page 72

7. Install the new front USB assembly into the card reader drive bay until it snaps into position. Then,
push the new front USB assembly to the left until the screw hole in the metal bracket of the front USB
assembly is aligned with the corresponding hole in the chassis.
Figure 41. Installing the front USB assembly
8. Install the screw to secure the front USB assembly to the chassis.
Figure 42. Installing the screw to secure the front USB assembly
9. Connect the cable of the new front USB assembly to the front USB connector 1 on the system board.
See "Locating parts on the system board" on page 13
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 109.
60
ThinkCentre M83, M93/p User Guide