IBM 102 User Manual page 153

2. System Configuration for a 4230 Printer
a. Auto Configuration
Auto Configuration can be utilized when either locally or
remotely attaching to the system. The printer is configured
as DEVTYPE (*IPDS), AFP (*NO). Other parameters are
automatically assigned by the system. If you need to specify
AFP equal to *Yes, the device description should be
manually changed to reflect this. See the AS/400 Device
configuration Guide.
b. Manual Configuration
To manually configure a local 4230 Printer use the
parameters given in the following table.
Type your choices and press Enter.
Parameter
Description
Device description
Device class
Device type
Device model
Advance Function
Port number Printing
Switch setting
Online at IPL
Attached controller
Font identifier
Form feed
Note: AFP *Yes can be specified if the level of OS/400
supports the printer as an AFP printer. See Step 1 on
page 2-12.
Chapter 2. Attaching the 4230 Printer to Your Computer
Parameter Parameter Setting
DEVD Workstation printer name
DEVCLS *LCL
TYPE *IPDS
MODEL 0000
AFP *NO (See Note)
PORT x
SWTSET y (Printer station address)
ONLINE *YES
CTL Twinaxial workstation
controller name
FONT zzz (Default font identifier)
FORMFEED *CONT
2-13