5.0 STOvE INSTALLATION
5.1
mINImUm CLEARANCE TO COmBUSTIBLES
5.1.1 STRAIGhT INSTALLATION
Through the Wall Installations
fIGure 5.1.1a
5.1.2 CORNER INSTALLATION
Through the Wall vents
fIGure 5.1.2a
note: If interior vertical pellet vent is used, the clearance to the back wall is determined by the
upward-turning elbow or "tee". It will vary in depth depending on the brand of pellet vent used (it is
approximately 5"). before placing the heater, connect the elbow or "tee" and allow for the minimum 3"
clearance to the combustible wall.
fIGure 5.1.1b
Interior vertical vents
Interior vertical vents
fIGure 5.1.2b
21
W415-0616 / E / 10.08.08