Panasonic KX-NS500 Installation Manual page 234

5.8.4 Installing IP Phones at a Remote Site with a Built-in Media Relay Gateway
WAN Side IP information of the router at the
Port Number
Port Number
For Data Download
Port Number
e.
Programme the following common settings in Option.
WAN Side IP information of the router at the
RTP
IP Address
SIP
IP Address
CWMP
IP Address
IP Address
NTP
IP Address
If necessary, you can program the individual settings here and overwrite the NAT - External IP
Address setting programmed in step a.
6.
Click OK.
Click Setup ® PBX Configuration ® Configuration ® Slot.
7.
8.
Move the mouse pointer over System Property.
A menu will be shown under the mouse pointer.
9.
Click Site.
10.
Click the Port Number tab.
11.
Programme the following items according to the protocol used by KX-UT series SIP phones in the remote
site.
a.
When the KX-UT series SIP phones are using HTTPS:
•
CWMP (HTTPS) Port No. for SIP-MLT
•
Data Transmission Protocol (HTTPS) Port No. for SIP-MLT
234 Installation Manual
main site
main site
Web Maintenance Console Parameter
NAT - CWMP Server (HTTP) Port No.
NAT - CWMP Server (HTTP) Port No. for
Network Survivability
NAT - SIP-MLT Data Download Server
(HTTP) Port No.
Web Maintenance Console Parameter
NAT - RTP IP Address
NAT - SIP Proxy Server IP Address
NAT - CWMP Server IP Address
NAT - CWMP Server IP Address for
Network Survivability
NAT - NTP Server IP Address