Zte 4G Fit Smart User Manual page 26

Symptom
How do I enable USB
tethering?
How do I configure
APN's
How do I enable Flight
Mode?
How do I clear my
Browser?
How do I check Call
forwarding etc
How do I check for
Software Updates?
How do I get more
technical support?
How do I change the
Ringtone?
The battery discharges
quickly
The handset switches
on by itself.
No incoming ring
or alarm tone
I cannot charge the
phone
The handset switches
off after charging.
I cannot connect to
other Bluetooth
devices
Solution
Menu > Settings > More > Tethering and Portable
hotspot > USB tethering.
(Connect as CDROM to install drivers)
Menu > Settings > More > Mobile Networks > Access
Point Names > Select + to add new APN
Long press on the power key > Flight Mode
Chrome > Options > Settings > Privacy > Clear Browsing
Data
Calls > Options > Settings > Call forwarding
Apps > System updates
Visit zte.com.au or call 1300 789 475 during office house
AEST.
Menu > Settings > Sound > Phone Ringtone
Possible network coverage issue. Check the signal level.
With only 1 or 2 bars, the battery has to work harder to
maintain network contact. Limit multi-media to save
power. The battery may be worn out.
An alarm or calendar event switches the handset on
automatically.
Hold the power key to check the phone is not in silent
mode.
Check the ringtone and ring volume settings.
Confirm the charger is properly inserted.
Remove the battery, clean the contacts and check it is
inserted correctly. The battery may be worn out.
Tip: Charge the phone using the supplied USB cable.
The handset is charging in the off state. Press and hold
the Red key to switch the handset ON.
Turn Bluetooth on. Set visibility to Show. Make sure the
pass-code is correct. Possible compatibility issues. Not all
functionality is supported between different Bluetooth
devices and standards.
26