6.10
Utility menu
In the utility menu, you can adjust various device parameters within five submenus and reset
all values to factory default condition.
1.
Press the [UTILITY] button to open the menu.
ð The display shows 'TRIGGER' .
2.
Use the [Page–/+] buttons to jump between the parameters (see the following chapters).
3.
Press the [SAVE/ENTER] button to open the respective submenus.
ð On submenu level, you can change the settings using the [+] / [–] buttons or the jog
wheel.
4.
Press the [SAVE/ENTER] button to save the changes.
5.
Press [EXIT] to return to the next higher level. To quit the menu press [EXIT].
MPS-600
Operation
65