Speaker Setup Parameters - Lexicon RV-8 User Manual

RV-8

SPEAKER SETUP PARAMETERS

SETUP SPEAKERS SET CROSSOVERS
The table below indicates the speaker setup parameters for config-
uring the Main Zone audio output connectors for the desired speaker
setup. These parameters are available in the CUSTOM SETUP and
THX SETUP menus.
Parameter Default Setting
FRONT L/R* 80Hz
CENTER* 80Hz
SIDE L/R* 80Hz
REAR L/R 80Hz
SUBWOOFER* 80Hz
THX ULTRA2 SUB OFF
BGC N/A†
ASA APART
* These parameters cannot be adjusted on the THX SETUP menu.
† When the THX ULTRA2 SUB parameter is set to OFF, the BGC parameter is not available (N/A).
or
CUSTOM SETUP SETUP
CUSTOM SETUP Menu
Possible Settings
FULL, FULL + SUB, 30 to 120Hz, THX 80Hz
FULL, FULL + SUB, 30 to 120Hz, THX 80Hz, NONE
FULL, FULL + SUB, 30 to 120Hz, THX 80Hz, NONE
FULL, FULL + SUB, 30 to 120Hz, THX 80Hz, NONE
FULL, 30 to 120Hz, THX 80Hz, NONE
ON, OFF
ON, OFF
APART, CLOSE, TOGETHER
SPEAKERS SET CROSSOVERS THX SETUP
Speaker setup parameters perform the same function regardless of
the selected speaker setup. When a parameter setting is adjusted on
one menu, the corresponding parameter setting is automatically
adjusted on the other menu. For example, when a THX speaker setup
is selected, the crossover settings on the CUSTOM SETUP menu are
set to THX 80Hz.
Default Setting
THX 80Hz
THX 80Hz
THX 80Hz
THX 80Hz
THX 80Hz
OFF
N/A†
APART
Setup
THX SETUP Menu
Possible Settings
THX 80Hz
THX 80Hz
THX 80Hz
THX 80Hz, NONE
THX 80Hz
ON, OFF
ON, OFF
APART, CLOSE, TOGETHER
3-29