Lexicon MPX 550 User Manual page 86

MPX 550
CmpRels
Controls the rate at which the compressor relaxes when
compressed input signal levels fall.
Decay (73ms to 19.61sec or 24ms to 6.53sec)
Controls reverb time for mid frequency signals. In
Ambience programs, Decay controls the length of the
ambience "tail".
Depth
Controls the level of volume modulation.
Diffusion
Controls the degree to which initial echo density
increases over time. High settings result in a high initial
buildup of echo density. (Echo density is also affected by
Size, with smaller spaces sounding denser.)
Dly Fbk
Serves as a master control determining the feedback of
left into left and right into right.
(4 to 250msec) Dly HiCut
Appears in Dual programs where one effect is Dly/Eko,
providing independent control over the Dly/Eko
high-frequency output. Dly HiCut applies a high-cut
filter similar to HF Rlloff to the Delay/Echo effect.
Dly Lvl
Controls the overall level of the signal fed into the Delay,
Echo effect.
(0 to 100%)
Dly Lvl 1, 2, 3
Controls the levels of voice set 1, 2, or 3 for both the left
and right channels.
(0 to 100%)
Dly XFbk
Determines the feedback of left into right and right into
left.
(0 to 100%)
Parameter Descriptions
(28Hz to 19.4kHz, off)
(off, -24dB to 0dB)
(off, -48dB to 0dB)
(0 to 100%)
5-5