Master Control Jumper And Terminals - Lennox XC25 Series Manual

3 -- ELECTRICAL (Continued) -- Master Control Jumper and Terminals
7-SEGMENT
DISPLAY
PUSH
BUTTON
PUMP DOWN - WHEN UNIT IS IN PUMP DOWN MODE, Pd WILL BE
DISPLAYED ON 7-SEGMENT.
TO ACTIVATE PUMP DOWN MODE, THE CONTROL MUST BE IN
THE IDLE STATE, AND THE PUMP DOWN JUMPER PLACED
ACROSS THE TWO PUMP DOWN PINS. TO DEACTIVATE,
REMOVE JUMPER.
FIGURE 10
Page 13
XC25 SERIES