Table of Contents
Advertisement
10. Test Time: Show the time when it has been already finished the test.
11. Arima: Company Mark, if double click this mark and input the password , will appear a window
it can set the equipment_config.txt for RD.
12. Start: Begin to run the test; it will appear a window that can input Bar Code. After input the Bar
Code, it will begin to run the test.
13. Quit: Close the APT program.
14. Pass: Count the quantity of Pass at present, if reopens the program it will calculate again.
15. Total: Count and quantity of test at present, if reopens the program it will calculate again.
16. Result: Show the test result at present.
17. Error: It will show the fist fail message.
18. The state bar:
1.
Total: Count the quantity of test at present.
2.
Fail: Count Fail quantity at present.
3.
Pass Rate %: Count the probability of Pass at present.
4.
Average Test Time: Count and test time equally at present.
5.
Time at present.
126
Advertisement
Table of Contents
