Page 2
BassKick 200 & 300 Bass: Preamp In the overall design of a bass amp, the preamp plays a central role. In an emphasis, attention is drawn to the deep bass share without As interface between the bass player and his instrument on the one noticeably changing the overall level.
Page 3
BassKick 200 & 300 Return: Bk 200 Connect the output of the effects pedal with this input. Line Out: The symmetrical line output reproduces the preamplifier signal including effects. As far as the circuit is concerned, it is located before the power amplifier and it is thus independent of the setting of the MASTER controller.
Page 4
BassKick 200 & 300 The amp is too quiet. Technical Data • A device that is operated in the loop causes level losses. The effects pedal must be levelled by means of its input/output controller. Security Specifications Mains input voltages: 240V, 220-230V, 117V, 100V The amp sounds too dull BK 200 BK 300...
Page 5
english espaÑol IMPORTANT ADVICE ON SAFETY! PLEASE READ ¡INDICACIONES DE SEGURIDAD IMPORTANTES! BEFORE USE AND KEEP FOR LATER USE! ¡LÉANSE ANTES DE UTILIZAR EL APARATO Y GUARDENSE PARA SU USO POSTERIOR! • The unit has been built by Hughes & Kettner in accordance with IEC 60065 and left the factory in safe working order.