Image Level Selection - Sanyo PLC-ZM5000 Owner's Manual

Video Input
Direct Operation
The Image Selection function can be operated directly by
pressing the IMAGE SEL. button on the remote control.
the last stored image will be displayed on the screen for
about 4 seconds.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
select and then press the Point ► or the SELECT
button.
Use the Point ▲▼ buttons to select the desired
2
item and then press the SELECT button.
* The factory default setting is Standard.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture level preset on the projector.
Natural
Natural picture level preset on the projector.
Cinema
Picture level adjusted with fine tone.
Image 1–10
User preset picture adjustment in the Image adjust Menu.
(p.48)
46

Image Level Selection

IMAGE SEL .
button
Image select Menu