Belt Guide; To Release The Seat Belt - Hyundai Genesis Coupe Owner's Manual

Hide thumbs Also See for Genesis Coupe:
Table of Contents

Advertisement

When the seat belt is fully extended from
the retractor to allow the installation of a
child restraint system, the seat belt oper-
ation changes to allow the belt to retract,
but not to extend (Automatic Locking
Retractor Type). Refer to "Using a child
restraint system" in this section.
✽ ✽ NOTICE
Although the combination retractor
provides the same level of protection for
seated passengers in either emergency
or automatic locking modes, it is recom-
mended that seated passengers use the
emergency locking feature for improved
convenience. The automatic locking
function is intended to facilitate child
restraint installation. To convert from
the automatic locking feature to the
emergency locking operation mode,
allow the unbuckled seat belt to fully
retract.

To release the seat belt:

The seat belt is released by pressing the
release button (1) in the locking buckle.
When it is released, the belt should auto-
matically draw back into the retractor.
If this does not happen, check the belt to
be sure it is not twisted, then try again.
Safety features of your vehicle
B210A01NF-1

Belt guide

The belt guide is used to improve access
to the seat belt and to allow access to the
rear seat.
When fastening your seat belt, position
the seat belt near the belt guide then
bring the guide strap around the seat belt
and snap the belt guide to the seat bot-
tom as indicated in the illustration.
The belt guide is secured to the side
shield by using the magnet(1) on the
guide strap.
OBK039053
3 17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Genesis coupe 2010

Table of Contents