Circuit Board "F" Replacement - Janome MC7700 QCP Service Manual

MECHANICAL ADJUSTMENT
PRINTED CIRCUIT BOARD (F)
SETSCREW (A)
SETSCREW (A)
PRINTED CIRCUIT BOARD "F" REPLACEMENT
[TO REMOVE]
1. REMOVE THE FRONT COVER (SEE PAGE 5).
2. PULL OUT THE CONNECTOR FROM THE PRINTED
CIRCUIT BOARD A (SEE PAGE 21).
3. REMOVE SETSCRWES (A) AND PRINTED CIRCUIT
BOARD F.
[TO ATTACH]
4. FOLLOW THE ABOVE PROCEDURE IN REVERSE.
19