Sony BRAVIA KDL-60NX723 Operating Instructions Manual page 9

3
Fix the TV to the Table-Top Stand
according to the arrow marks
guide the screw holes using the supplied
screws.
~
• If using an electric screwdriver, set the torque at
approximately 1.5 N·m {15 kgf·cm}.
For KDL-60NX72x
1
Align with the two dowels of the Table-
Top Stand, and gently place the TV,
checking the f mark is facing the front.
Downloaded From TV-Manual.com Manuals
that
Neck
2
Attach the TV and Table-Top Stand with
the supplied screw and hexagon wrench.
* 3 N·m {30 kgf·cm}
~
• Set the torque setting to approximately 3 N·m {30
kgf·cm}.
Detaching the Table-Top Stand
from the TV
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 3. For
KDL-60NX72x, be sure to remove the screws
for detaching the head when the Table-Top
Stand is not attached to the TV.
~
• Do not remove the Table-Top Stand for any reason
other than to install corresponding accessories on
the TV.
• When removing the Table-Top Stand from the TV,
lay the display face down on a stable work surface
that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the work
surface.
*
Head
9
GB