Table of Contents
Advertisement
Motion Detection
To enable Motion Detection:
1.
In Movie/Picture Record Mode, press OK Button to switch to record menu screen.
2.
Use Right/Left Buttons to select Movie Mode. Submenu of Movie Mode will pop out on the
screen.
3.
Use Up/Down Buttons (Tele-Wide Buttons) (
Button to switch to Motion Detect submenu.
4.
Use Up/Down Buttons to choose On or Off.
5.
Press OK Button to validate the setting and exit.
6.
Camera will start to record video once if there is a movement for 3 consecutive seconds.
Stop recording if there is no movement for 3 seconds.
Motion Detect
Night Mode
With the camera set to Night Mode, you can take images in a low-light environment.
To enable the Night Mode:
1.
In Movie/Picture Record Mode, press Enter Button to switch to record menu screen.
2.
Use Right/Left Buttons to select Movie Mode. Submenu of Movie Mode will pop out on the
screen.
3.
Use Up/Down Buttons to select Night Mode, then press Enter Buttons to switch to Night
Mode submenu.
4.
Use Up/Down Buttons to choose ON or OFF.
5.
Press Enter Button to validate the setting and exit.
) to select Motion Detect then press OK
Motion Detect Option
OK Button
23
Advertisement
Table of Contents
