Connecting The Audio Player And Computer - Durabrand MP-400 Operating Instructions Manual

2-3. Connecting the Audio Player and Computer

Both PC or Mac users must use the USB cable to connect the player and computer
before you can download or upload music files to the computer.
1 Connect the smaller plug of the USB cable to the mini-USB port on the player as shown.
Plug only fits one way, if the plug does not match the mini-USB port, don't force it,
just reverse it and try again.
2 Connect the larger plug of the USB cable to any available USB port on your computer.
First time connection of the player to the computer with
Windows Me, 2000, or XP, the computer will detect "New
Hardware" and software drivers will be installed by Windows
automatically.
3 At the same time, the player will display the "USB" Mark on
the player's LCD display.
4 You are now ready to copy music files or data to the player. It will display "
downloading (when you copy music files from computer to player), and displays "
when uploading (when you copy files from player to computer).
Fig. 2-3-1 Connecting the Audio Player and Computer
NOTE: If you are using Windows 98SE, you must first install Windows 98SE driver, see page
7.
Shows when uploading
Shows when downloading
9
Shows when USB
is connected
" when
"
IB-MP400-WC-E-061005