Quick Reference - Panasonic KX-TD 816 Quick Reference Manual

1
— Log-In/Log-Out Button
• Enter into programming mode.
• Press the desired CO button.
• Dial 71.
• Press STORE button.
• Exit from programming mode.
— Loop-CO (L-CO) Button
• Enter into programming mode.
• Press the desired CO button.
• Dial .
• Press STORE button.
• Exit from programming mode.
— Message Waiting (MESSAGE) Button
• Enter into programming mode.
• Press the desired CO or DSS button.
• Dial 3.
• Press STORE button.
• Exit from programming mode.
— Night Button
• Enter into programming mode.
• Press the desired CO or DSS button.
• Dial 73.
• Press STORE button.
• Exit from programming mode.
— One-Touch Dialing Button
• Enter into programming mode.
• Press the desired Flexible button.
• Dial 2 + desired number.
• Press STORE button.
• Exit from programming mode.
— Phantom Extension Button
• Enter into programming mode.
• Press the desired CO or DSS button.
• Dial 72 + phantom extension number.
• Press STORE button.
• Exit from programming mode.
— SAVE Button
• Enter into programming mode.
• Press the desired Flexible button.
• Dial 5.
1-4

Quick Reference

Quick Reference
— Single-CO (S-CO) Button
— Two-Way Record Button †
— Two-Way Transfer Button †
— Voice Mail (VM) Transfer Button
Full One-Touch Dialing
Assignment
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired CO button.
• Dial 0.
• Dial outside line number as follows.
- 01 - 08 : if connected to a KX-TD816
- 01 - 24 : if connected to a KX-TD1232
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired CO or DSS button.
• Dial 90 + Voice Mail extension number.
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired CO or DSS button.
• Dial 91 + Voice Mail extension number.
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired Flexible button.
• Dial 8 + Voice Mail extension number.
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Dial 3.
• Dial 1 or 2.
- 1 : Off mode
- 2 : On mode
• Press STORE button.
• Exit from programming mode.