Operation; Installation Guide; Home Or Shop Modes; Channel Menu - JVC LT-32HA60U Operating Instructions Manual

OPERATION

Installation Guide

The First Time Setup screen will appear when the
T V is first switched on or reset to the factory
settings.
First Time Setup
OSD Language
Mode Setting
Country
Antenna Type
Auto Scan
Start
1).Press the ▼▲ buttons to navigate the menu and
◀▶buttons to change the settings. Select your
desired language to be displayed on the menu and
choose between Home Mode and Shop Mode.

Home or Shop modes

1. Home Mode is an energy-saving Mode. Home
Mode is recommended for normal viewing setting
and is set as default.
2. Shop Mode is an option for retailers for advertising
or product presentation. Shop Mode has a brighter
image than Home Mode.
3. You may switch between Home or Shop Mode
as you choose.
2). Press the ◀▶buttons to select AIR/Cable that is
to say DVB-T/DVB-C.
First Time Setup
OSD Language
Mode Setting
Country
Antenna Type
Cable
Auto Scan
Start
English
Home Mode
Germany
Air
DTV+ATV
English
Home Mode
Germany
Cable
Quick
DTV+ATV
Note
If you select DVB-C, you will select Full or Quick
way to scan.Also you can select Auto Scan mode.
DTV+ATV or DTV only, or ATV only.
3). Channel tuning will commence. This operation
may take a few minutes. The display will show the
progress of the tuning and the number of
channels found.
4). If you want to skip the DTV tuning, press the
MENU button to interrupt the tuning half way.
You will then go straight to ATV tuning.
You may repeat the above step if you also want to
skip the ATV tuning. An installation reminder will
appear the next time you turn on the TV, if no
channel is found.
5). After tuning is complete, the channels are
arranged in a preset order. If you wish to skip
channels, modify the preset order or rename
channels, select P rogramme Edit under the

Channel menu.

Note
DTV Digital TV
ATV Analogue TV (not used in France and UK)
1. CHANNEL MENU
1. 1)Auto Tuning (DVB-T)
1). Press the MENU button and then press the▼▲
buttons to select the CHANNEL menu and then press
the OK button or right button.
2). Press the ▼▲ buttons to select Auto Scan and
then press the OK button or right button.
EN
15