Setting The Downmix Audio Out; Video Setup - Durabrand DVD-1002 Instruction Manual

INITIAL SETTING

Setting the Downmix Audio Out

Downmix audio output setup allows you to select LT/RT or STEREO audio output mode.
1
In STOP mode, press the SETUP button on the
remote control, "
2
Use button to highlight "
3
Press button and use
"DOWNMIX".
4
Press button and use
"LT/RT" or "STEREO".
5
Press the OK button to confirm.
6
Press the SETUP button to exit the SETUP mode.
- LT/RT
Select this item when the disc supporting Pro Logic Dolby Stereo is played. You have the
opportunity to hear a program's soundtrack in the most accurate and realistic presentation
possible.
- STEREO
For 5-channel output, the left and right track signals are output simultaneously; For 2-channel
output, the ordinary stereo signal is output.
VIDEO SETUP (VIDEO OUT)
If the video connection is Normal or S-Video, please set the Video Output to S-VIDEO; If you
want to use the Component Video connection or Progressive Scan video (see page 4), please
set the Video Output to YUV mode.
1
In STOP mode, press the SETUP button on the
remote control, "
2
Use button to highlight "
3
Press button to highlight "VIDEO OUT".
4
Press button and use
"YUV" or "S-VIDEO".
5
Press the OK button to confirm.
6
Press the SETUP button to exit the SETUP mode.
NOTE 1: YUV is a superior video standard. It can optimize the translation of the Video, Y
means Luminance, U and V mean chrominance.
NOTE 2: If sound does not come out of your TV, try using other AUDIO INPUT jacks near the
Video jacks and make sure jacks are plugged in.
IB-DVD1002(AT)-WM-E-032706.pmd
" (System Setup) is selected.
" (Audio Setup).
button to highlight
/ buttons to select
" (System Setup) is selected.

" (Video Setup).

/ buttons to select
14
15
AUDIO SETUP
DIGITAL OUT
DOWNMIX
LT/RT
A B
STEREO
EXIT SETUP
TO SET PRESS THE N
SET UP
TO QU IT PRE SS
VIDEO SETUP
VIDEO OUT
YUV
S-VIDEO
A B
EXIT SETUP
TO SET PRESS THE N
SET UP
TO QU IT PRE SS
IB-DVD1002 (AT)-WM-E-032706
7/5/2006, 10:24 AM
OK
OK