Basic Play - Durabrand DVD-1002 Instruction Manual

1. BASIC PLAY

1
After completing all of the audio and video cable connections, turn on your TV and set it to the
correct video-in channel (for more information, please see box below).
2
Plug the player's AC power cord into an AC wall outlet and press ON/STANDBY button on
the player or on the remote control.
PUSH HERE
D i s c
LABEL SIDE UP
4
Press VOLUME + or VOLUME – button to adjust the volume level on your TV's REMOTE
and DVD's REMOTE.
5
Some discs will start playing automatically, and others will display the Disc Contents Menu
on TV screen. If the menu is presented, use the
and press OK button to confirm. To select a play option, press numeric buttons (0-9).
6
To pause playback, press the
NOTE: During play, press the STOP button once, the display will show "PRE STOP
you press the STOP button the second time, the display will show "STOP
now your system is in the full STOP mode.
7
To resume playback, press the
8
To skip to another track/chapter, press the
9
To access the disc menu or title menu during DVD play, press the MENU or TITLE button
on the remote control.
NOTE: This player has a screen saver which will display a bouncing DVD oval if the player is
stopped or paused and no button is pressed for a while.
Make sure you have completed all the connections (see pages 4-5), you may need to
change your TV's video input mode to see the DVD player's menu and movies. The video
input channel varies with different brands and models, many TV remote controls have a
TV/VIDEO button which can be used to change to different video inputs and back to TV for
normal broadcast viewing. Once you selected the correct channel, your TV will show the
opening DVD screen. For more details, please see your TV manual.
IB-DVD1002(AT)-WM-E-032706.pmd
3
Press the OPEN button on the DVD player to open the disc
door. Place a disc gently on the tray (lable side up) and close the
door by pushing it down. The DVD player starts to read the disc's
table of contents (this may take 10-20 seconds).
NOTE 1: Load the disc with the label side facing up, when
playing a double-sided disc, load it with the desired
playing side face down.
NOTE 2: "NO DISC" or "ERR DISC" will show in the display if
the disc is upside down or the disc is badly scratched
or dirty, it will not play, please clean it or change the
disc, also you can buy a disc polisher to repair it.
button; To stop playback, press the STOP button.
button.
How to Find your TV's Video Input Channel
15
16
, , & buttons to highlight your selection
/ buttons repeatedly during playback.
IB-DVD1002 (AT)-WM-E-032706
7/5/2006, 10:24 AM
", if
", and