Indications And Displays; Lc Display Panel; Indications And Displays Of The Receiver - Sennheiser EK 500 G2 Instructions For Use Manual

Hide thumbs Also See for EK 500 G2:

Table of Contents

ew_500_EK.book Seite 42 Dienstag, 4. November 2003 11:05 11

Indications and displays

Alphanumeric display

"B.CH" – appears when the channel bank and

the channel number are displayed

"MHz" – appears when the frequency is displayed

4-step battery status display

Lock mode icon

(lock mode is activated)

"PILOT" display

(pilot tone evaluation is activated)

"MUTE" display

(audio output is muted)

7-step level display for received audio signal "AF"

7-step level display for received RF signal "RF"

When used together with an ew 500 G2 transmitter, the

receiver provides information on its operating states and

those of the received transmitter (remote displays).

Operation and battery status indication

The red LED (LOW BAT/ON)

current operating state of the receiver:

Red LED lit up:

Red LED flashing:

provides information on the

The receiver is switched on and the

capacity of the batteries/BA 2015

accupack is sufficient.

The

batteries

accupack is going flat (LOW BAT)!

are/the

BA 2015

Table of Contents