Cd Program Play - Durabrand CD-965 Operating Instructions Manual

CD PROGRAM PLAY

The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Program Number
Track Number (song number)
During programming, the word PROG shows in the display. To program songs to play in
your preferred order, follow steps below:
1.Press the PROGRAM button in STOP
mode after the disc stops rotating.
The word PROG will show in the Display.
Program number
2.Press the SKIP/SEARCH button (
) to select track number 2 (example).
Track number will flash in the displa
Track
number
Programming Example:
1 2 3
2 8
5
3.Press the PROGRAM button. Track 2 is
now programmed.
Program number 2 will now show in the
display, ready for your next selection of
track.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5.After programming is finished, press
the PLAY button to begin programmed
play. Music begins with PROG shown in
the display.
or
y.
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button twice. Then you may press PLAY
button to re-start normal play.
Your programmed memory will be
lost:
•
When the door is opened.
•
When the batteries are exhausted or
removed.
•
When the power is off.
7
4 5 6
1 2 4
IB-CD965(CDM32J-60F8)-WM-E-010504
etc.
7 8
etc.
1 1