Head Restraints - Skoda Roomster Owner's Manual

Adjusting height of seat*
– Lift the seat if required by pulling or pumping lever
– Lower the seat if required by pushing or pumping lever
wards.
Adjust the angle of the seat backrest
– Relieve any pressure on the backrest (do not lean on it) and turn the
A
handwheel to adjust the angle of the backrest.
3
The driver's seat should be adjusted in such a way that the pedals can be pressed
to the floor with slightly bent legs.
The backrest on the driver's seat should be adjusted in such a way that the upper
point of the steering wheel can be easily reached with slightly bent arms.
WARNING
•
Only adjust the driver seat when the vehicle is stationary - risk of injury!
•
Take care when adjusting the seat! Adjusting the seat without care can
lead to bruises or injuries.
•
The backrests must not be angled too far back when driving otherwise
this will affect proper operation of the seat belts and of the airbag system -
risk of injury!
Using the system Safety
A
upwards.
2
A
down-
2
Driving Tips General Maintenance

Head restraints

Best protection is achieved if the top edge of the head restraint is at the
same level as the upper part of your head.
Adjusting the height of a head restraint
– Grasp the side of the head restraint with both hands and push the
head restraint in the direction of axle of the metal guide rods, in the
⇒ fig. 46
direction of arrow to the top or to the bottom.
Breakdown assistance
Seats and Stowage
Fig. 46 Adjusting head
restraint
Fig. 47 Removing a head
restraint
Praktik Technical Data
55